Address
304 North Cardinal St.
Dorchester Center, MA 02124
Work Hours
Monday to Friday: 7AM - 7PM
Weekend: 10AM - 5PM
LB47LE-63-OP 4.5kA Intergrated Residual Current Circuit Breaker with Overcurrent Protection.ALL-IN-ONE combined Earth leakage, overload & short circuit protect switch
Overview:
LB47LE-63-OP is an integrated one-piece RCBO, integrating residual current protection, long-time overload protection and instantaneous short-circuit protection in single module. It complies fully with IEC 61009-1 & GB/T 16917.1 standards. With identical electrical performance to split DZ47LE-63 series, it adopts integrated modular structure for more compact installation and simpler wiring. Suitable for AC 50/60Hz single-phase 230V & three-phase 400V distribution circuits, rated current range 6~63A. It cuts off circuit within ≤0.1s once electric leakage or electric shock occurs, meanwhile preventing cable overheating and fire caused by overload & short-circuit. Widely applied in residential power distribution, commercial lighting, data center terminal power supply, temporary construction power. Compatible with standard TH35 DIN rail mounting.
Parameters
| Parameter Item | Standard Specification Value |
|---|---|
| Applicable Standard | IEC 61009-1, GB/T 16917.1 |
| Frame Rated Current | 63A |
| Rated Operating Current In | 6/10/16/20/25/32/40/50/63A |
| Rated Operating Voltage Ue | 1P+N / 2P: AC230V; 3P / 3P+N / 4P: AC400V |
| Rated Insulation Voltage Ui | 500V |
| Rated Frequency | 50Hz / 60Hz |
| Instantaneous Trip Curve | Type C (5~10In), Type D (10~14In) |
| Rated Breaking Capacity Icn | 4.5kA / 6kA (optional) |
| Rated Residual Operating Current IΔn | 30mA (standard), 100mA, 300mA |
| Residual Current Breaking Time | ≤0.1s |
| Rated Residual Making & Breaking Capacity IΔm | 500A |
| Impulse Withstand Voltage Uimp | 4000V |
| Power Frequency Withstand Voltage (1min) | 2kV |
| Protection Class | IP20 (for indoor cabinet installation) |
| Pollution Degree | Class 2 |
| Installation Category | Category Ⅱ, Ⅲ |
| Mechanical Operation Life | 10,000 times |
| Electrical Operation Life | 4,000 times |
| Compatible Mounting Rail | TH35-7.5 standard DIN rail |
| Operating Ambient Temperature | -5℃ ~ +40℃ (24h average ≤35℃) |
| Storage Temperature | -25℃ ~ +70℃ |
| Terminal Screw Torque | 6~32A: 1.2N·m; 40~63A: 2.0N·m |
| Pole Specification | Rated Voltage | Typical Application Scenario |
|---|---|---|
| Integrated 1P+N | AC230V Single Phase | Household socket & lighting circuit |
| Integrated 2P | AC230V Single Phase | High-power air conditioner, water heater |
| Integrated 3P | AC400V Three Phase | Three-phase power equipment |
| Integrated 3P+N | AC400V Three Phase 4-Wire | Commercial distribution cabinet, data center power |
| Integrated 4P | AC400V Three Phase 4-Wire | Industrial equipment, outdoor construction power |
Installation & Operation Instructions
- Mount vertically on TH35 DIN rail. Switch handle UP = ON (closed), DOWN = OFF (open). Mounting tilt angle ≤±5°.
- Wiring rule: Power input from top terminal, load output from bottom terminal. Tighten screw with specified torque to avoid overheating caused by loose contact.
- Leakage function test: Press yellow test button every month, the breaker shall trip reliably. Press blue reset button before re-closing after leakage trip.
- Environment limit: Do not install in flammable & explosive, strong corrosive gas or high condensation environment without protection. Max installation altitude ≤2000m.
- Fault judgment guide: Slow trip = overload fault; instant trip = short-circuit fault; trip with leakage indicator popped up = circuit leakage fault, easy for line troubleshooting.
Send us a message if you have any questions or request a quote.Our experts will give you a reply within 24 hours
and help youselect the right valve you want.